Crochet Hydrangea Pattern from Small Four-Petal Florets
Crochet seven blue four-petal florets over a soft green dome for a hydrangea head. Includes petal anchors, cluster layout and center embroidery.

This small crochet hydrangea head groups seven pale-blue four-petal florets over a green dome. One floret sits at the peak and six surround it. Each tiny cream center is embroidered, so no beads, wire or rigid stem are needed.
Crochet seven eight-stitch floret bases and form four petals across each rim. Make a green 24-stitch dome that narrows to a 12-stitch underside opening. Close it with a matching disk, then anchor the seven floret centers at the marked positions without stitching their free petals down.
Project Overview
| Detail | Information |
|---|---|
| Terms | US crochet |
| Skill | Confident beginner with sewing |
| Construction | Crochet seven eight-stitch floret bases and form four petals across each rim. Make a green 24-stitch dome that narrows to a 12-stitch underside opening. Close it with a matching disk, then anchor the seven floret centers at the marked positions without stitching their free petals down. |
| Testing | Arithmetic reviewed; physical sample not tested |
Project views are generated illustrations of the intended construction. Sizes, yarn use and attachment performance remain unverified on a physical sample.
Materials
| Material | Suggested specification |
|---|---|
| Cotton | About 20–25 g pale blue, 10 g green and scrap cream fine cotton; estimates |
| Hook | 2.5 mm or a size producing firm small pieces |
| Filling | A small amount for the support dome only |
| Tools | Needle, scissors, markers and positioning pins |

Size and Gauge
The intended cluster width is about 5–6 cm, unmeasured. Work one floret first and check its width against a plain 24-stitch dome swatch or the actual support. Yarn and tension determine how much neighboring petals overlap; there is no universal finished diameter.
Abbreviations and Working Notes
| Term | Meaning |
|---|---|
| ch | Chain |
| sc | Single crochet |
| sl st | Slip stitch |
| inc | 2 sc in one stitch |
| dec | Invisible sc decrease over 2 stitches |
| MR | Magic ring |
| dc | Double crochet |
US terms. Joined rounds exclude starting chains and joining sl st from stitch counts. Count the old base anchors separately from petal chains.
A floret has eight sc base stitches. Each petal uses two old stitches: a valley slip stitch and a three-dc petal anchor with a return slip stitch into that same second anchor.
The green support contains soft filling. The seven blue florets stay flat and unstuffed; no stem, leaves or display hardware is specified.
Make One Eight-Stitch Floret Base
| Round / stage | Instructions | Count / check |
|---|---|---|
| 1 | Blue: 8 sc in MR; join | 8 |
| Center | Close ring and leave a long base tail for attachment | One flat disk |
Keep the base small and flat. The starting tail will pass through the support later, so leave it accessible at the center rather than weaving it away. Do not add a second increase round: it would change the four-petal repeat below.

Work Four Petals and Repeat
| Round / stage | Instructions | Count / check |
|---|---|---|
| One petal | Sl st in next old stitch; ch 2, 3 dc, ch 2 and sl st all in next old stitch | Consumes two base stitches |
| Repeat | Work that sequence four times around the eight-stitch base | Four petals |
| Quantity | Finish and make six more matching florets | Seven florets |
Each petal anchor contains all three dc and the final valley slip stitch after ch 2. Begin the next petal in the next unused old stitch. Join the last valley neatly and bury the upper working tail on the reverse. Compare all seven florets; do not count one petal chain as a new base stitch.
Crochet the Green Dome and Bottom Disk
| Round / stage | Instructions | Count / check |
|---|---|---|
| Dome 1–4 | 6 sc in MR; inc around; (sc, inc) × 6; (2 sc, inc) × 6 | 6, 12, 18, 24 |
| Dome 5–7 | Sc around three rounds | 24 each |
| Dome 8 | (2 sc, dec) × 6 | 18 |
| Dome 9 | (Sc, dec) × 6; leave open | 12 |
| Bottom disk | 6 sc in MR; inc around; finish | 6 then 12 |
Mark the starting magic ring as the dome peak. Add light filling and sew the disk edge to the open underside with twelve matched pairs. Keep the support rounded and soft rather than tightly packed. The green base should remain mostly behind the blue florets in the final front view.

Arrange Seven Florets on the Dome
| Round / stage | Instructions | Count / check |
|---|---|---|
| Peak | Pin one floret center over dome magic ring | One top floret |
| Ring | On dome Round 4 mark positions 1, 5, 9, 13, 17 and 21 | Six equally spaced anchors |
| Surrounding florets | Pin one base center at each marked position | Six around the top |
Arrange all seven before sewing. Rotate neighboring florets slightly so their free petals cover gaps without bunching into one hard ridge. The marked positions are a starting layout on the actual support; assess coverage from above and both sides before permanent stitches. Do not add extra florets silently to hide a sizing mismatch.

Sew Centers and Add Cream Details
| Round / stage | Instructions | Count / check |
|---|---|---|
| Attachment | Sew each floret base center to dome through several small fabric paths | Seven broad base anchors |
| Centers | Embroider two tiny crossed cream stitches on each blue center | No beads |
| Finish | Lift petals free and bury all ends inside support | No exposed long strands |
Use each blue base tail to catch support fabric beneath the center, making at least two short securing passes in different directions. Avoid sewing the broad petal edges flat against the dome. Add cream centers with small relaxed stitches, remove every pin and inspect the green underside. The article does not establish a safe toy or wearable fastening.
Troubleshooting
| Problem | Likely cause | Adjustment |
|---|---|---|
| Cluster looks flat | Dome unfilled or compressed | Restore light rounded support |
| Florets have extra petals | Old anchors counted incorrectly | Use four two-anchor repeats |
| Green shows widely | Gauge mismatch or layout gaps | Repin seven florets before sewing |
| Petals cannot lift | Edges caught in seams | Resew centers only |
Care and Related Projects
Follow cotton and filling labels. Spot clean, gently separate free petals and dry completely. Inspect all seven base anchors before attaching the cluster to another object.
For another useful construction reference, see this related crochet project. Its stitch counts and attachment positions belong to that project; keep the instructions for this design separate.

Frequently Asked Questions
How many florets are made?
Seven, each with four petals.
Does it include a stem?
No stem, leaves or rigid support is included.
Are the centers beads?
No. Each center uses two small crossed cream stitches.
Can I change the number of florets?
That is a new size arrangement; check support coverage and document the new layout rather than assuming the same fit.
Compact Pattern Card
| Stage | Key instruction |
|---|---|
| Make One Eight-Stitch Floret Base | Close ring and leave a long base tail for attachment |
| Work Four Petals and Repeat | Finish and make six more matching florets |
| Crochet the Green Dome and Bottom Disk | 6 sc in MR; inc around; finish |
| Arrange Seven Florets on the Dome | Pin one base center at each marked position |
| Sew Centers and Add Cream Details | Lift petals free and bury all ends inside support |


