Crochet Dahlia Pattern with Pointed Folded Petals
Crochet a burgundy dahlia with twelve pointed folded petals in two rings. Includes disk counts, cone folding and backing placement.

This burgundy crochet dahlia uses twelve small disks folded into pointed cones and sewn in two rings. Six larger outer petals alternate with six smaller inner petals around a small coiled center. A flat green backing holds the bases while the points radiate outward.
Make six eighteen-stitch burgundy disks and six twelve-stitch disks. Fold each by overlapping its sides to create a pointed cone. Sew the large petals to six paired positions on a twenty-four-stitch backing, then add six smaller petals in the intervening paired positions and a short coiled chain center.
Project Overview
| Detail | Information |
|---|---|
| Terms | US crochet |
| Skill | Confident beginner with sewing |
| Construction | Make six eighteen-stitch burgundy disks and six twelve-stitch disks. Fold each by overlapping its sides to create a pointed cone. Sew the large petals to six paired positions on a twenty-four-stitch backing, then add six smaller petals in the intervening paired positions and a short coiled chain center. |
| Testing | Arithmetic reviewed; physical sample not tested |
Project views are generated illustrations of the intended construction. Sizes, yarn use and attachment performance remain unverified on a physical sample.
Materials
| Material | Suggested specification |
|---|---|
| Cotton | About 25–35 g burgundy and 5 g green fine cotton; estimate |
| Hook | 2.5 mm or suitable size for dense flexible fabric |
| Tools | Needle, markers, pins and scissors |

Size and Gauge
The intended bloom is about 7–9 cm across in fine cotton, but no physical sample has been measured. Its width depends on the cone overlap and petal spread. Keep one finished folded petal as a comparison for the remaining five in each size; equal final disk counts alone do not guarantee equal cone shapes.
Abbreviations and Working Notes
| Term | Meaning |
|---|---|
| ch | Chain |
| sc | Single crochet |
| sl st | Slip stitch |
| inc | 2 sc in one stitch |
| dec | Invisible sc decrease over 2 stitches |
| MR | Magic ring |
| dc | Double crochet |
US terms. Work joined single crochet rounds, excluding the joining slip stitch and ch 1. All twelve petals use burgundy; there is no separate contrast flower center.
A cone here is a folded flat disk, not a stuffed tube or a mathematically closed cone. The disk sides overlap and are sewn only near their lower inward-facing base.
There are exactly six outer and six inner petals. No wire, stem, glue, leaves or stuffing is included.
Crochet Six Larger Petal Disks
| Round / stage | Instructions | Count / check |
|---|---|---|
| 1 | 6 sc in MR; join | 6 |
| 2 | Inc around; join | 12 |
| 3 | (Sc, inc) × 6; join | 18 |
Make six disks, leaving a sewing tail on each. Keep the disks flat and compare the edges. A tight ring may be closed snugly, but do not pull the center so hard that the entire disk cups before folding.

Crochet Six Smaller Petal Disks
| Round / stage | Instructions | Count / check |
|---|---|---|
| 1 | 6 sc in MR; join | 6 |
| 2 | Inc around; join | 12 |
| Quantity | Finish with long tails | 6 smaller disks |
These inner petals stop one round earlier. Keep the hook and cotton the same as for the outer ring; reducing hook size instead would change flexibility as well as diameter. Lay the two sets apart so the assembly does not alternate sizes accidentally.
Fold and Secure Each Point
| Round / stage | Instructions | Count / check |
|---|---|---|
| Fold | Overlap left and right disk edges toward center | Point outward, curved opening inward |
| Base | Pin the overlapping lower fabric | Leave curved rim open |
| Seam | Make small passes through overlapped layers near base | One stable folded petal |
Arrange a disk with one edge facing outward. Bring the two side edges over each other so the outermost fold forms a narrow pointed end. The open curved rim and overlapping attachment area sit toward the flower center. Do not sew the whole curved rim shut or stuff the pocket. Make the same overlap on all six disks of each size and compare the resulting points before sewing them to the backing.

Make the Green Backing
| Round / stage | Instructions | Count / check |
|---|---|---|
| 1 | 6 sc in MR; join | 6 |
| 2 | Inc around; join | 12 |
| 3 | (Sc, inc) × 6; join | 18 |
| 4 | (2 sc, inc) × 6; join | 24 |
Leave the backing flat. Mark twelve consecutive pairs around its rim: 1–2, 3–4 and so on through 23–24. These are spacing references for attaching bases, not extra crochet rounds. Keep the green face that you want visible at the back facing away from the petals.
Arrange Two Alternating Petal Rings
| Round / stage | Instructions | Count / check |
|---|---|---|
| Outer six | Bases at rim pairs 1–2, 5–6, 9–10, 13–14, 17–18, 21–22 | Six larger petals |
| Inner six | Bases near pairs 3–4, 7–8, 11–12, 15–16, 19–20, 23–24 | Six smaller petals |
| Center | Burgundy ch 13; sl st back 12; coil and stitch | One small spiral |
Pin the outer six first, all points facing away from the backing center. Sew each overlapped petal base across both marked backing stitches and catch neighboring dense fabric for a broad join. Add the smaller ring slightly closer to the center, between the outer points. Its bases can overlap the sewn outer bases; keep the tips visible. Coil the narrow slip-stitch strip without stretching it and sew it over the remaining center joins.

Refine the Bloom
| Round / stage | Instructions | Count / check |
|---|---|---|
| Count | Six large and six small points remain visible | 12 petals total |
| Back | No long yarn floats across backing | Ends buried |
| Shape | Adjust each folded opening gently | No glue or stiffener |
Remove every pin and inspect each folded seam before shaping. Spread the points by hand while supporting the backing; do not pull a petal by its tip. The intended flower is flexible and softly dimensional, not a rigid geometric ornament. Physical stability of the folds still needs a sample test.
Troubleshooting
| Problem | Likely cause | Adjustment |
|---|---|---|
| Petals look tubular | Edges closed along entire rim | Keep curved opening free |
| Uneven outer ring | Different cone overlaps | Compare all six before sewing |
| Green gaps visible | Bases spread too far apart | Repin with gentle overlap |
| Center bulky | Coil stretched or doubled | Use one narrow strip |
Care and Related Projects
Follow cotton care instructions and reshape damp without stretching points. Dry flat supported from beneath. Avoid crushing folded petals during storage.
For another useful construction reference, see this related crochet project. Its stitch counts and attachment positions belong to that project; keep the instructions for this design separate.

Frequently Asked Questions
How many petals are included?
Twelve: six larger outer petals and six smaller inner petals.
Are the petals stuffed?
No. They are flat disks folded and sewn near the base.
Is the center a bead?
No. It is a short burgundy slip-stitch chain coiled and sewn.
Can the backing be omitted?
The backing supplies the placement and attachment surface. Omitting it changes the assembly.
Compact Pattern Card
| Stage | Key instruction |
|---|---|
| Crochet Six Larger Petal Disks | (Sc, inc) × 6; join |
| Crochet Six Smaller Petal Disks | Finish with long tails |
| Fold and Secure Each Point | Make small passes through overlapped layers near base |
| Make the Green Backing | (2 sc, inc) × 6; join |
| Arrange Two Alternating Petal Rings | Burgundy ch 13; sl st back 12; coil and stitch |
| Refine the Bloom | Adjust each folded opening gently |


